For Research Use Only.
Not for use in diagnostic procedures.
30251 Rev F, Saphyr Networking and Setup Guide
Page 25 of 36
2.1.1.6.
Add the Saphyr static IP, Netmask/Gateway and DNS IPs. Edit the ifcfg-p4p1 file
with the
following command.
sudo nano ifcfg-p4p1
2.1.1.7.
“
Cntl x
” to save. “
Y
” for yes and
Enter
.
2.1.1.8.
Restart network with the following command:
sudo systemctl restart network
2.1.2. Edit Saphyr1a Host File
2.1.2.1.
Edit the Saphyr1A hosts file with the following command:
sudo nano /etc/hosts
2.1.2.2.
Add the assigned Bionano Access Server static IP to Saphy1a Host file.
Important:
Only add Bionano Access Server static IP.
Note:
The file should look similar to below. Option A will display preconfigured addressing 10.10.1.1 to
10.10.1.4(single Saphyr Compute) – 10.10.1.12(two Bionano Computes).
