For Research Use Only.
Not for use in diagnostic procedures.
30251 Rev F, Saphyr Networking and Setup Guide
Page 21 of 36
Saphyr/Bionano
Compute
Server/s Cabling and Operation
The customer may adopt one of the following networking options if not utilizing a Compute on Demand solution.
Figure 2 Compute Server Data Center Options
Introduction of Data Center Option A
This default compute configuration requires
one static IP address
for the Saphyr1a Compute Node in the data
center. The remaining compute nodes will be on a separate custom subnet. The Saphyr1a node will be dual homed.
It will have one static IP accessible to the Bionano Access server and one IP address on the subnet with the other
compute nodes. IP routing will be used on Saphyr1a to direct responses from the compute nodes back to the
Bionano Access Server. The internal subnet addressing will come preconfigured as 10.10.1.0/24.
Introduction of Data Center Option B
This configuration requires one static IP address
per node
.
