AIR CLEANER SAFETY
PLEASE READ AND SAVE
THESE IMPORTANT SAFETY
INSTRUCTIONS
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and injury to persons, including the following:
•
Read all instructions before using the appliance.
•
To avoid fire or shock hazard, plug the air cleaner and
Galileo
®
Wireless Air Quality Center directly into a 120V AC
electrical outlet.
•
If the filter is covered by a bag when shipped: Remove
plastic bag before use.
•
Keep the cord out of heavy traffic areas. To avoid fire haz-
ard, NEVER put the cord under rugs, near heat registers,
radiators, stoves, or heaters.
•
To protect against electrical hazards, DO NOT immerse in
water or other liquids. Do not use near water.
•
Close supervision is necessary when any appliance is used
by or near children, or disabled persons.
•
Always unplug the air cleaner before moving it, opening the grill,
changing the filters, cleaning, or whenever the air cleaner is not
in use. Be sure to pull by the plug and not the cord.
•
NEVER drop or insert any object into any openings.
•
DO NOT operate any appliance with a damaged cord or
plug, if motor fan fails to rotate, after the appliance malfunc-
tions, or if it has been dropped or damaged in any manner.
Return appliance to manufacturer for examination, electrical
or mechanical adjustment, or repair.
•
Use appliance only for intended household use as
described in this manual. Any other use not recommended
by the manufacturer may cause fire, electric shock, or injury
to persons. The use of attachments not recommended or
sold by The Holmes Group may cause hazards.
•
DO NOT use outdoors.
•
NEVER block the air openings, grills/outlets or place on a
soft surface such as a bed or sofa, as this could cause the
unit to tip over, thus blocking the Air Intake Opening/Grill.
•
Keep unit away from heated surfaces and open flames.
•
Galileo
®
Wireless Air Quality Center should only be used in
a room with temperatures between 40
o
F and 110
o
F.
•
DO NOT attempt to repair or adjust any electrical or
mechanical functions on this unit. Doing so will void serv-
2
BAP2000/200105EM1 P.qxd 5/20/05 16:04 Page 3
