BIOFLEX Home Unit Скачать руководство пользователя страница 40

Страница: 40 / 71

Warnings for Using the Treatment Arrays:

• Do not twist

• Do not hyperextend

• Do not drop

• Do not tamper with diodes

Note: The Treatment Arrays must be secured to

allow air circulation around the top of the head. Do

not cover the heads while running treatments,

however you can use the Meditech approved

weight set.

LD-Series

Body Switch and Indicator

The LD-Series Treatment Heads are activated when the nosecone

tip contacts the skin. After selecting a treatment or continuing

to the next phase, wait until the indicators on the Treatment

Head turn green before applying the Head. Once the indicators

are green, apply the Treatment Head tip to the treatment area

and the treatment will begin (the indicators will turn amber).

Removal from the skin will cease treatment and the indicators

will return to green.

NOTE: When applying the Treatment Head, it is

important to ensure that the flat end makes full

contact with the skin. Failure to do so might

expose bystanders to potentially dangerous laser

radiation. Refer to the pictures below for the

correct and incorrect application of the Treatment

Head.

A Treatment sleeve MUST always be used for

broken or compromised skin.

Содержание Home Unit








































































Результаты поиска

Содержание Home Unit

Отзывы:

Похожие инструкции для Home Unit

Бренды по названию

Популярные бренды

BIOFLEX Home Unit, Руководство по эксплуатации

Результаты поиска

Содержание Home Unit

Отзывы:

Похожие инструкции для Home Unit

Бренды по названию

Популярные бренды