Bioer LifePro, Руководство пользователя

Страница: 3 / 48

LifePro Thermal Cycler Important Notes
—
ii
—
instrument body they shall not be blocked or covered. When a single set or several sets of
instrument are used, the interval between its surrounding ventilation opening and its nearest object
shall not be below 50cm or 100cm. Also, don’t use the instrument on loose or soft surface, or the air
inlet at instrument bottom might be blocked.
Excessive temperature would impair the test performance or result in fault of instrument. This
instrument shall not be used in location subjected to direct sunshine. The instrument shall be kept
away from hot gas, stove and all other heat source.
If the instrument is to be set aside for a long time, the power plug shall be withdrawn and the
instrument covered with soft cloth or plastic film to avoid entrance of dust.
g) Notes during operation
During test, cares shall be taken to prevent liquid from dropping onto the instrument.
Caution:
In any of the following cases, immediately cut off the power supply, withdraw the power
plug from the power socket, contact the supplier or ask qualified repair personnel for
treatment:
y
Liquid drops into inside of the instrument.
y
The instrument is rained or watered.
y The instrument works abnormally, especially generates abnormal sound or odor.
y The instrument is dropped or its casing is damaged.
y The function of instrument obviously changes.
3. Instrument label
Warning!
The instrument is adhered with mark “HOT SURFACE!” During operation of instrument
or a period immediately after completion of running of a program, any portion of body
shall not be contacted with metallic portion (module or hot-lid) nearby the said mark;
otherwise skin would be burnt.
4. Maintenance of instrument
In order to ensure full contact and good heat conduction between the test tube and the conical holes,
the conical hole on the module shall be regularly cleaned with clean soft cloth soaked with a little
absolute alcohol. The stained surface of this instrument, if any, shall be cleaned with soft cloth
soaked with cleaning paste.
Warning!
At cleaning of instrument, its power supply shall be cut off.
The instrument surface shall not be cleaned with corrosive cleaning agent.
5. After-sales service
The warranty content and scope are shown in the warranty sheet.
Note:
y After unpacking, immediately check the goods against the packing list. In case of
damaged or missed goods, please immediately contact the supplier.
y After qualification of acceptance, properly fill the product acceptance sheet and send
(or fax) the copied sheet to the supplier for filing and maintenance.
y After unpacking, the packing box and packing materials shall be well kept for future
repair. For the damage of instrument occurring during transporting to the repair
department due to improper package, Hangzhou Bioer Technology Co., Ltd. shall bear
no liability.