G-Wave
3
Installation must be carried out only by a qualifi ed
electrician
A Type: Power cable equipped
1. Take
off and get rid of the closing cover.
2. Separate the power supply cover kit.
3. Secure the line and connect the power cable into the
proper terminal block locations.
4. Verify connections are correct before proceeding.
5. Replace the power supply cover kit.
6. Minimum wire cross section: 2 x 1mm
B Type: Power cable equipped
Operating Instructions and Parts Manual
Surface Mounted High Speed Hand Dryer
General Safety Information
WARNING
This product is intended for installation by a qualifi ed
service person. Use AWAG No.16 solid conductor for
wiring.
Failure to properly ground unit could result in
electrical shock and/or death.
Disconnect power at the service breaker before
installing or servicing.
NOT FOR HOUSEHOLD USE - MAY CAUSE BURNS
All units must be supplied with a 3-wire service. The
ground wire must be connected with the dryers back
plate.
To reduce the risk of fi re, electric shock and injury please
observe the following.
•
Always use genuine spare parts.
•
Do not use for purposes other than drying hands.
•
Do not place foreign objects in the unit.
•
Do not cover the unit.
•
Do not use in locations where salt water damage
may occur or where corrosives are present.
•
Do not operate in an explosive atmosphere.
•
Do not use in areas with high humidity and avoid
condensation on the product.
•
Children should be supervised when using the
appliance.
•
For indoor use only, not suitable for use outside.
•
Keep away from excessive water.
•
Unplug appliance before cleaning or maintaining
the appliance.
This appliance must not be disposed together with
the domestic waste. This appliance has to be disposed
at an authorised place for recycling of electrical
devices.
Installation
NOTE: Do not install dryer over wash basin.
If the power supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a similar
qualifi ed person in order to avoid a hazard.
Means for disconnection must be incorporated in the
fi xed wiring in accordance with the wiring rules.
Closing cove
Closing cover
Po
Power supply cover kit
wer supply cover kit
Содержание G-Wave
Страница 1: ...1 G Wave Hand dryer Automatic High Speed...
