G-Wave
7
Operating Instructions and Parts Manual
Surface Mounted High Speed Hand Dryer
Anti-theft bolt
Lock: Right
Unlock: Left
HEPA FIlter
If the LED light on the front of the unit fl ashes red then
the HEPA fi lter needs to be changed. The HEPA fi lters last
for 50,000 uses.
To change the fi lter slide the anti theft lock to left and
remove the fi lter case from the underside of the unit.
Remove the old HEPA fi lter from the case and replace
with a new one.
When a new fi lter has been correctly installed the LED
light will fl ash twice after fi ve secconds. If the light does
not fl ash then the fi lter needs to be re-installed cor-
rectly.
Warning – if the fi lter is not replaced in time, it may
interrupt air fl ow and overheat the motor. In this case,
the warranty will be invalidated.
The fi lter must be replaced every 3-6 months to avoid
invalidating the warranty period.
Always use the unit with a genuine fi lter and the water
tank in place.
Do not attempt to wash and re-use the HEPA fi lter. The
fi lter works for 50,000 uses, after this it should be dis-
posed of and replaced by another fi lter.
Do not install the fi lter cartridge if the fi lter is wet or
damp, it must be perfectly dry. If the cartridge is in-
stalled wet it can cause serious motor damage and the
warranty will be invalidated.
Gel Blocks
The gel block is situated in the underside of the fi lter
case. The gel block should be replaced every month,
each pack contains 12 blocks.
Changing The Filter and Gel Block
Gel block
HEPA Filter
To order Gel Blocks and HEPA Filters please contact us:
call:
01404 814292
email:
or visit:
www.dripdropdry.com
Product
Order Code
Antibacterial HEPA fi lter
HDS-GW-HEPA-FILTER
Moisturising Gel
HDC-G-Wave GELS
Содержание G-Wave
Страница 1: ...1 G Wave Hand dryer Automatic High Speed...
