biodex 058-820, Инструкция по эксплуатации

Страница: 12 / 20

12
Using the Hand-Held Controller
CAUTION: Before adjusting the tabletop position, ensure the patient is secure
to the tabletop with patient safety restraint straps.
The hand-held controller may be used to adjust table height, Trendelenburg/Reverse
Trendelenburg, lateral roll and X-Y positioning. To adjust table position, press and hold the
appropriate button and release to stop movement.
Using the Foot Controller
The Foot Controller activates all motions for the table. Place the foot controller between the
wide urologic access legs for proper representation. The four separate rocker style switches on
the foot controller activate motions when pressed as follows: Trendelenburg, Lateral roll (tilt),
Height Up/Down, and (Round switch) activates X-Y motion. Releasing the rocker switch at any
time immediately stops the motion.
NOTE: When the table is used in a wet environment, it is recommended that the Foot Controller
be covered with a plastic bag and sealed as watertight as possible.
Note for Hand-Held and Foot Controllers :
NOTE: The table can perform only one motorized function (i.e. raising or lowering the
tabletop, lateral roll, X-Y movement, Trendelenburg/Reverse Trendelenburg) at a time. If
a second button on the Hand-Held Controller (or the Foot Controller) is pressed while the
table is already performing a motorized function the tabletop movement will stop. At
that point, all buttons must be released before the selected function can resume.
Figure 2.3. Hand-Held Controller