WI-108 SterilCut S28 Band Saw User Manual
Revision August 27 2019
11
8. Install Blade Guide by inserting the two pins into the designated holes and sliding the bottom pin down into
place. Tighten hand knob to lock Blade
Guide/Guard into place. For adjusting Blade Guide/Guard see “Setting
Blade Guide/Guard
Height” (Pg. 17)
9. Insert the Tension Wheel carrier into the top of the Blade Housing. Ensure threaded hole on the Carrier is
pointed to the top of the Blade Housing.
10. Add in the Tensioning Screw through the top of the Blade Housing, and slide Carrier up to threaded
component. Rotate two to three turns clockwise to hold Carrier in position.
