4. Calibration
The Instrument is automatically calibrated
every time at switching on. The
performances of the specifications are
guaranteed for one year.
It is suggested to be done tests by the
service officer every two years.
5. Instrument description
5.1. Analog type display
5.2
Yellow button on/off
5.3. Table for testers which has to be
connected with the cathode.
5.4. Cylindrical cathode. It should be hold
in the hand of the patient.
5.5.
Measurement anode with black cable.
5.6.
USB connection at the right side of
the corpus.
5.7.
Two red cables: one for the cylindrical
cathode, the other for the table.
5.8.
For the normal measurements the
device should be in horizontal position
6. Instruction for work
6.1. The preparation of the device
- The two red cables are connected in the
places marked as cathode. One of them is
connected with the cylindrical electrode
and the other- with the metal table for
samples.
-The black cable is connected with the
measurement nib and the other side- with
the device in the place marked as anode.
-Put on the yellow button. If the batteries
are there it should the needle to go to the
“100”of the scale and than to go back to
“0”.This is the automatic calibration of the
Voll machine.
