BIO UV BIOSUN 340, Руководство по установке и обслуживанию, Страница: 15 / 43

BIOSUN-340_(Anglais) - DOC012466 - Ind. B03 - 21/06/2017 Copyright BIO-UV
Marque, Modèles et Brevets déposés - Produits exclusifs Page 15
b-2.7. Fitting the P3 type formed sections
Do not tighten the screws at this point, as you will need to handle the formed sections in the next step!
•
Fit two short screws (20mm) to the U formed sections you previously fitted to the foundations. You will
need a nut and a small washer for each screw.
Figure 16 shows how to assemble the screws.
•
Repeat this procedure for the other narrow U formed section!
•
Attach the screws to the P3 type formed section as indicated in figure 17 on both sides
•
Make sure that the construction makes a right angle (90) relative to the foundation
•
Attach the screws on both sides
Ä
Both P3 formed sections are now screwed to the floor
Nut
Small washer
Short screw
U type formed section
Foundation
Cross-sectional view
Front view
Base plan for the formed
section P2 type P2 type formed section
Foundation