BIO RAD Bio-Plex Pro, Инструкция по эксплуатации

Страница: 61 / 82

Defining New Programs
Bio-Plex Pro and Bio-Plex Pro II Wash Stations 61
Clear Program
This submenu is used to clear a program from the instrument's memory.
Confirm that selected program
is to be deleted
CLR (Program Position)?
Select the program to be deleted
from the instrument's memory
(Program Position: Program Name)
The name of the program which
has been deleted appears
(Program Name: DELETED)
CLEAR
< > EXIT OK
CLR PROGR 1?
NO YES
A: DELETED
CLR PROGR 1:A
< > EXIT OK
Press OK to enter the CLEAR
menu.
If the program is locked it cannot be cleared and the following message is displayed:
PROGRAM IS
LOCKED
The program can only be unlocked via the HydroControl software, by users with the
appropriate rights.
Settings Menu
The Settings menu has the following options:
Edit Plates Adjustment procedure for setting the parameters for up to
20 different microplates.
Options The Settings menu contains the following submenus:
Edit LLD Channels , Vacuum Filtration , Process Control .
Bubble
Sensor The Bubble Sensor sensitivity can be set to Low , Medium , or
High depending on liquids used (if this option is installed). If very
foamy liquids are used the bubble sensor should be switched OFF .
The Settings menu has the following structure:
EDIT PLATES
< > EXIT OK
SETTINGS
< > OK
OPTIONS
< > EXIT OK
BUBBLE SENSOR
< > EXIT OK