BIO RAD 170-6555, Инструкция по эксплуатации

Страница: 26 / 49

22
Software Reference
Insert Band
This selection allows you to insert a band which may otherwise have been overlooked by the automatic
band marking function. Selecting Insert Band causes the Outline cursor to be displayed. By pressing the
left mouse button and dragging, you draw the band’s outline. When you release the left mouse button, the
band’s marker appears and the band data is included in the band tables.
Delete
The three choices under this selection delete band data from the band tables. To return a band’s data to the
band tables after a delete operation, you must use the band finding functions (Find Bands in Complete
Image or Find Bands in Marked Rectangle) or use the Insert Band function.
Band
Use this function to delete a band’s data from the band tables. Click on the + marker to select the band
(the mark is green when selected), and then select Delete - Band. Deleting a Band Marker does not
remove that band’s outline, but it does delete that band’s data from the band data tables.
A Single Lane
To remove all data for a selected lane from the Band Tables. Note that the Lanes are re-numbered.
All Bands and Lanes
Deletes all band and lane data from the band tables.
Find More Find Fewer
This function allows you to adjust the sensitivity of Glyco Doc’s automatic band marking software to auto-
matically increase or decrease the number of marked bands. Note that it affects the number of bands
marked, but not the number of bands found. From the Find More or Less Bands window, use the appro-
priate scroll bar arrow to quickly mark or unmark bands within the entire image.
Standard Lane Analysis
For standard lane analysis, each band must be associated with a standard band before it can be assigned a
quantity. Glyco DOC supports the following standard lane analyses. An example of a standard lane analy-
sis is provided at the end of the previous chapter.
Oligosaccharide
This uses the glucose ladder standard.
Monosaccharide
This uses the monosaccharide ladder standard.
DNA
This allows you to specify your desired standard.
Protein
This allows you to specify your desired standard.