User Manual
Bio-Optica Milano S.p.A. Via San Faustino 58 - 20134 Milan
Phone +39 02.21.27.13.1 - Fax Italy +39 02.21.53.000 - Fax 39 02.21.54.155
19
Publication date: 02/03/2020
Rev. 00
4
– Useful information
5
– Return to the previous screen
6
– Area for technical assistance (not accessible)
7
– Operator panel
5.3 TIME AND DATE
This screen allows setting the machine’s time and weekday.
Note: To correctly set the weekly switch-on and off programming (see corresponding chapter), first set the correct time
and date.
1
–Weekday selection: select the current weekday.
2
– Set the current time
3
– Save settings
5.4 WEEKLY PROGRAMMING OF WORK SESSIONS
This section enables setting the weekly programming of the automatic machine heating on and off.
To use this function, first leave the machine in stand-by mode.
When the working session start time is reached, the machine will start the heating phase of the hot parts; at the end of
the programmed work session the machine will remain on, but will switch to stand-by mode.
3
1
2
4
