BIO-MICROBICS HighStrengthFAST 1.0, Руководство по обслуживанию

Страница: 4 / 18

4
GENERAL INFORMATION
One or more of the following patents protects this process: 3,966,599; 3,966,608; 3,972,965; 5,156,742.
Certified by NSF International, the MicroFAST ® 0.5, 0.625, 0.75, 0.9, and 1.5 systems meet NSF Standard 40,
Class 1 and Standard 245 certifications for wastewater treatment devices.
If you have questions regarding any BioMicrobics product, please contact your distributor first.
If necessary, contact us at:
1-800-753-FAST (3278) or +1-913-422-0707
e-mail: onsite@biomicrobics.com
ABOUT FAST ®
The FAST® (Fixed Activated Sludge Treatment) system uses naturally occurring bacteria (biomass) to treat
sewage for dispersal into the environment. This continuous process provides the biomass with food (waste)
and air in a suitable environment. Dead bacteria and non-biodegradable waste settle and accumulate in the
bottom of the tank for periodic removal.
The FAST assembly consists of two components: the treatment module and blower. The blower provides air to
the system via the air supply pipe. The air supply pipe and draft tube create an airlift, which mixes oxygen and
waste throughout the media inside the tank. Bacteria, supported by air from the airlift, grows on the media
and digests the waste. Finally, a vent pipe expels vapors created by the process.
Always secure all access covers to prevent unauthorized people from entering the tank. Only
qualified service personnel should open access ports and/or covers.
Infectious organisms also exist in a septic tank. So if any contact with wastewater occurs,
immediately wash and disinfect all exposed areas and contact personal physician. Failure to
do so could result in severe sickness or death.
DO NOT use an open flame or cause a spark near a septic tank’s access points. Gases
emanating from septic tanks can explode if ignited or deadly if inhaled.