BINZEL-ABICOR PSB 121, Руководство по эксплуатации, Страница: 23 / 72

EN - 5
PSB 2 Product Description
Standard values for cutting capacity
The specifications on the cutting capacity are standard values only, which are
also greatly affected by the following items. Type and quality of material;
pressure and impurities in compressed air; temperature of the work-piece to be
cut; desired quality of cut; condition of electrodes and cutting nozzle; distance
and position of cutting torch, relative to the work-piece; power source
characteristics; cutting speed.
PSB Operating
mode Load
DC
Gas supply Operating information Ignition
voltage
60%
DC
35%
DC Inlet
pressure req.
Volumetric
flow Gas post-
flow time
(A) (A) (bar) (l/min) (sec) (kV)
31 Single-gas 30 50 Plasma/cooling
gas 3,5 - 4,5 130 approx.
15 7
60 Single-gas 60 60 Plasma/cooling
gas 5,0 - 6,0 150 approx.
60 7
121 Twin-gas 60 100 Plasma gas
Cooling gas 3,5 - 4,5
5,5 - 7,0 15
150
ca. 60
7
Tab. 4 Product-Specific Data
Type Plasma
nozzle max. current
intensity Steel Stainless
steel Aluminium
ø
mm A
PSB 30 1,0 30 max. 6 max. 8 max. 1,5
PSB 60
AUT PSB 60 1,0 40 max. 10 max. 9 max. 3
1,3 60 max. 15 max. 13 max. 5
PSB 121
AUT PSB 121 1,0 40 max. 10 max. 9 max. 3
1,3 60 max. 15 max. 13 max. 5
1,5 80 max. 25 max. 22 max. 10
1,8 100 max. 25 max. 30 max. 18
Tab. 5 Material thickness (mm) at the given rated current