Unplug power supply of the Motor, wait for 15 seconds, resume power supply of it.
Press [Open] + [Stop] + [Close] + any of blank keys [Left] and [Right],
altogether 4 keys, within 8 seconds until Motor makes a twitch.
Password is cleared off when the Motor makes a twitch.
After Motor makes a twitch, simultaneously press [Open] + [Close] keys
of the Remote Control within 8 seconds;
the Motor will make a twitch
Setting Completed
erased.
is not added, the old password will not be
others will be erased. If a new password
only the password of this remote remains,
When all the procedures are done,
Signal Ground
RX TX
Power Output
(Optional)
System
Manual Switch
Green: Signal Ground
Brown: RX
Red: TX
(Optional)
Yellow: Power Output
A brief contact will activate the function; DO NOT short-circuit continuously.
With flat side (po) of the Battery facing
upwards, making sure that the Battery is latched
up by two spring plates, insert Battery in a
slanted angle to enter it into the Battery Holder.
Completed.
flat side (po)
latched up
by two spring plates
same time as a
downwards at the
the Roller Shade will
makes a twitch,
When the Motor
response.
move upwards and
time as a response.
downwards at the same
will move upwards and
twitch, the Roller Shade
When the Motor makes a
P.4
