When the pre-determined position is reached,
the setting is completed when Motor makes a twitch.
press [Stop] key once to stop the movement;
press any of the blank keys [Left] and [Right] + [Set] to confirm;
press [Stop]
of the blank keys
press any
makes a twitch.
The motor
as a response.
and downward at the same time
When the Motor makes a twitch,
the Roller Shade will move upward
Setting Completed
the Upper-Limit setting is completed, too.
And the setting of Lower-Limit has been cleared as well.
When all procedures are done,
indicating that the setting mode of Lower-Limit is activated.
Press [SET] + [Close] keys until Motor makes a twitch,
back
the Motor will make a twitch
Press [Open] or [Close] key to move the Roller Shade
to a pre-determined position, to be set as the Lower-Limit.
Tap to fine tune.
and it will move continuously.
Press for 2 seconds,
press [Stop]
press any
of the blank keys
The motor makes a twitch.
Setting Completed
the mode will be deactivated if no keys are pressed within 5 seconds.
When entering the Lower-Limit position setting mode,
CAUTION
Plus, previous setting will not be recorded. Please go back to STEP-1 and reset it.
the Roller Shade will move
When the Motor makes a twitch,
upwards and downwards at the
same time as a response.
press any of the blank keys [Left] and [Right] + [Set] to confirm; the setting is completed when the Motor makes a twitch.
When the pre-determined position is reached, press the [Stop] key once to stop the movement;
When all procedures are done,
the Lower-Limit setting is completed, too.
response.
downwards at the same time as a
Roller Shade will move upwards and
When the Motor makes a twitch, the
When the Motor makes a
twitch, the Roller Shade
will move upwards and
time as a response.
downwards at the same
P.2
