The WAN -> In Dialup -> ISDN-> New menu consists of the following fields:
Fields in the ISDN Basic Parameters menu
Field
Description
Description
Enter a name for uniquely identifying the connection partner.
The first character in this field must not be a number and no
special characters or umlauts must be used either.
Connection Type
Select which layer 1 protocol your device should use.
This setting applies for outgoing connections to the connection
partner and only for incoming connections from the connection
partner if they could be identified on the basis of the calling
party number.
Possible values:
•
ISDN 64kbps
: For 64-kbps ISDN data connections.
•
ISDN 56kbps
: For 56-kbps ISDN data connections.
User Name
Enter your device code (local PPP user name).
Remote User (for Dialin
only)
Enter the code of the remote terminal (remote PPP user name).
Password
Enter the password.
Always on
Select whether the interface should always be activated.
The function is activated with
Enabled
.
The function is disabled by default.
Only activate this option if you have Internet access with a flat-
rate charge.
Connection Idle Timeout Enter the idle time in seconds for static short hold. The static
short hold setting determines how many seconds should pass
between sending the last traffic data packet and clearing the
connection.
Possible values are
-1
to
3600
(seconds). A value of
-1
means
that the connection is set up again immediately after disconnec-
tion and
0
deactivates short hold. The default value is
20
.
10 WAN
Funkwerk Enterprise Communications GmbH
200
bintec R200 Series
