38
6 Set up with the display and adjustment module
NCR-84 Two-wire 4 … 20 mA/HART
51141-EN-181127
– Select menu items in the quick setup menu
– Select editing position
•
[+]
key:
– Change value of the parameter
•
[ESC]
key:
– Interrupt input
– Jump to next higher menu
The instrument is operated via the four keys of the display and
adjustment module. The individual menu items are shown on the LC
display. You can find the function of the individual keys in the previous
illustration.
With the Bluetooth version of the display and adjustment module you
can also adjust the instrument with the magnetic pen. The pen oper-
ates the four keys of the display and adjustment module right through
the closed lid (with inspection window) of the sensor housing.
1
2
4
5
3
Fig. 37: Display and adjustment elements - with adjustment via magnetic pen
1 LC display
2 Magnetic pen
3 Adjustment keys
4 Bluetooth symbol
5 Lid with inspection window
When the
[+]
and
[->]
keys are pressed quickly, the edited value,
or the cursor, changes one value or position at a time. If the key is
pressed longer than 1 s, the value or position changes continuously.
When the
[OK]
and
[ESC]
keys are pressed simultaneously for more
than 5 s, the display returns to the main menu. The menu language is
then switched over to "
English
".
Approx. 60 minutes after the last pressing of a key, an automatic reset
to measured value indication is triggered. Any values not confirmed
with
[OK]
will not be saved.
6.3 Measured value indication - Selection of
national language
With the
[->]
key you move between three different indication modes.
Operating system - Keys
direct
Adjustment system - keys
via magnetic pen
Time functions
Measured value indica-
tion
925-0373 Rev A
