Binks airLess 1M spraY gun: tWist-tip reVersiBLe nOzzLe cLeaner
7
A
B
C
D
F
E
“F” – tOp VieW
Note: “Smooth” side is up
“F” – BOttOM VieW
Note: “Ground” side is down
1
2
3
Rotate PART B as
shown and insert into
the 7/16" diameter
opening in PART C.
Note: PART B will not
fit unless rotated.
While keeping
PART B inside PART C,
rotate PART B back to
its original facing (bev-
eled opening
facing forward).
using a pen
to hold PART B
in place, insert PART A
(flange side out) into PART B.
Press PARTS A & B together firmly.
B
C
6
Rotate PART E
clockwise 90º
as shown so
that its flange
aligns with
the opening
in PART F.
Insert PART E
into the
assembly.
Rotate PART E
counter-clock-
wise 90º to
complete the
Twist-Tip.
A
B
PEN
4
Slide PART F onto the groove on
PART D.
part F must have the “top” side up.
Please refer to the diagrams above
which show the difference between
the top and bottom sides of PART F.
D
F
5
Insert the A/B/C assembly
into the E/F assembly,
making sure the 7/16”
diameter opening faces up.
E
F
7/16"
opening
faces up
Rotate 90º
Flange must align with
matching groove of PART F
Rotate 90º
Must
return
to this
facing
