Bindicator SonoTracker Ultrasonic Liquid Level Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 96

Bindicator SonoTracker Ultrasonic Liquid Level Скачать руководство пользователя страница 55

SONOTRACKER SERIES MENU DESCRIPTIONS

MENU OPTIONS

The following options are available from the MENU key in manual mode:

•

10 Display: Select desired display formats, input vessel and adjust

brightness and contrast.

•

20 Calibration: System configurations including full point, or Math Menu

span and mode of operation; Math Menu for Math Channel configuration.

• 30

Relay Set Point: Configure relay set point.

•

40 I-Output: Configure Current (mA) output.

•

50 Serial/PLC: Set up serial out and PLC.

•

60 Transducer: Configure the transducer including frequency, delay and

threshold values.

•

70 Range/Filters: Set up range and filter windows.

•

90 Service Menu: Includes access configuration as well as system default

and copy function.

Figure 19: Menu Tree Diagram

10 DISPLAY

The Display Menu is used to set up the parameters that govern the display functions when channel monitoring.
This section covers the functions in the Display Menu. Explanations of each of the functions are provided.

Unless otherwise noted, the display function for each channel (such as ID) can be set differently. The
descriptions below for each function note those that are global in nature and that affect the display for all
channels.

As shown in

Figure 19

, the Display Menu has eight submenus.

Press SCAN/HOLD Key

Press MENU key

and then either

the arrow keys

to select desired

menu structure

or

type in the menu

number, i.e. 30 and

press Enter.

FROM CHAPTER FOUR

01 XXKHz

XXXX XXX

Figure 18: Controller Menu
Access Diagram

51

www.bindicator.com

SON280020 Rev. C

«
...
53
54
55
56
57
...
»

Содержание SonoTracker Ultrasonic Liquid Level

































































































Отзывы:

Нет отзывов