Bindicator SonoTracker Ultrasonic Liquid Level Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 96

Bindicator SonoTracker Ultrasonic Liquid Level Скачать руководство пользователя страница 38

MENU KEY

Pressing the Menu Key accesses the Main Menu. Pressing the ESC key backs through the submenus one level at a
time. To scroll through the menus, use the Up and Down Arrow Keys.

Note: The controller must be in the Manual Mode (Auto LED off) to access the menus.

For example, the first screen shows:

Press the Up Arrow Key for further options, e.g.:

SonoTracker Series

10 Display

SonoTracker Series

20 Calibration

F1, F2, AND F3 KEYS

The Function Keys — F1, F2, and F3 — are used for lower case characters

NAME

RAW

TEXT

%

QUICK

CONFIG

and special symbols when editing the display. From Scan mode, press
HOLD then F1 to display the raw target (in inches or centimeters) from
transducer face to processed echo. In flow mode, the backspace key
displays the raw target. Pressing F2 changes to bar graph mode. Pressing
F3 will initiate a quick configuration or re-calibration of a channel (level
only). See

Appendix G

.

ESC KEY

The Esc Key has several functions:

•

The Esc Key is used to back through the submenus one menu level at a time. Pressing this key while in
the Main Menu returns the display to the RUN Mode.

•

The Esc Key also has another function. The SonoTracker Series controller arrives from Bindicator with a
factory-set ID number assigned to each channel. If you replaced the number with a customer-defined ID
during the Startup Procedure or in the Display Menu, pressing the Esc Key while the display is in the
Manual Mode (Auto LED off) briefly displays the factory-set ID.

(BACKSPACE ARROW) KEY

The Backspace key is used to back up the cursor on the LCD display when using the alphanumeric keypad.

34

www.bindicator.com

SON280020 Rev. C

«
...
36
37
38
39
40
...
»

Содержание SonoTracker Ultrasonic Liquid Level

































































































Отзывы:

Нет отзывов