Binder 9040-0189, Руководство по эксплуатации

Страница: 51 / 119

CB-S / CB-S-UL (E7) 06/2020 page 51/119
12.6 Setting the chamber address
This setting is required for the communication with the BINDER APT-COM™ 4 Multi Management Soft-
ware. The chamber address settings in the chamber controller and in the software must be identical.
Required access level: “Admin”.
Path: Normal display Settings Chamber Chamber address
Press the OK button to enable the setting.
Setting the chamber address
The current setting flashes. Enter the desired address with the arrow
buttons . Setting range: 1 up to 254
Confirm the entry with the OK button .
Chamber address
With the arrow-down button you can now change to the next parameter (display brightness).
With the Back button you can go back to the “ Chamber ” submenu and, repeatedly pressing it, to Nor-
mal display .
12.7 Display brightness
Required access level: “Admin”.
Path: Normal display Settings Chamber Brightness
Press the OK button to enable the setting.
Setting the display brightness
The current setting flashes. Enter the desired value with the arrow but-
tons . Setting range: 10% up to 100%
Confirm the entry with the OK button .
Brightness
With the arrow-down button you can now change to the next parameter (audible alarm, chap. 15.3).
With the Back button you can go back to the “ Chamber ” submenu and, repeatedly pressing it, to Nor-
mal display .