Binder 9020-0112, Руководство по эксплуатации

Страница: 63 / 85

KB (E3.1) 08/2012 page 63/84
16.3 Protocol printer (option from size 53 on)
The protocol printer is connected using the KB interface via an interface converter RS 422 / RS 232.
Make sure that the interface mode is correctly set to “Printer” in the user level (chap. 10).
Interface configuration:
Baud rate: 9600
Stop bit: 1
Parity: none
Figure 12: Protocol printer
The actual temperature values are put out regularly with fixed formatting.
Printout: one printed line for each print interval with relative time stamp, temperature value with one
decimal point, curve representation (see “Manual for Setting Matrix Printer Epson LX-300+“, Art. No.
7001-0041). In every 5th line the set print interval “Ptime” in minutes is noted. The printer interval is set in
the user level (chap. 10).
Example: Temp.: 34.7 *
Temp.: 35.6 *
Temp.: 32.8 *
Temp.: 30.1 *
Ptime : 001. *
Temp.: 27.4 *
Temp.: 26.9 *
Temp.: 26.6 *
Temp.: 26.4 *
Ptime : 001. *
Temp.: 26.2 *
In this example the print interval is set to 1 min, i.e., every minute a new temperature value is printed.
In connection with the set print interval, referring to real time can be achieved by noting down
the start time of the registration.
16.4 Data logger kit
The BINDER Data Logger Kit offers an independent long-term measuring system for temperature,
available for different temperature ranges.
The BINDER Data Logger is equipped with a keyboard and a large LCD display, alarm functions and a
real-time function. Measurement data are recorded in the Data Logger and can be read out after the
measurement via the RS232 interface of the Data Logger. It offers a programmable measuring interval
and permits storing up to 64000 measuring values. Reading out is done with the Data Logger evaluation
software. You can give out a combined alarm and status protocol directly to a serial printer.
Data Logger Kit T 220: Measuring sensor for the temperature values of the chamber: Temperature
range -90 °C / 194 °F up to +220 °C / 428 °F.
For detailed information on installation and operation of the BINDER Data Logger, please
refer to the mounting instructions Art. No. 7001-0204 and to the original user manual of the
manufacturer, supplied with the data logger.