26
9 TROUBLESHOOTING
If you have dif
¿
culty with your phone, please try the suggestions listed below.
Problem
Causes
Solutions
No dialling tone when pressing
<TALK ON> key
a.
The connection cord of the base
station is not plugged in.
b.
The adapter cord is not plugged
in correctly in the base station.
c.
Another handset is using the
base to make a call.
d.
Wrong telephone line cord
a.
Check the connections. Unplug
plug back in the mains.
Check that the telephone cord
been plugged into the base sta
the phone socket.
b.
Check the base station plug an
230V plug (remove and plug-in
c.
Wait until the line is unoccupied
d.
Use the original telephone line
supplied.
When connected to a PBX,
no / or wrong connection after
dialling
Dialling prefix is needed.
Insert the dialling prefix.
OUT OF RANGE
is displayed
a.
Base station out of range.
b.
Base station not connected to
mains.
a. Reduce the range.
b. Connect base station to mains
The call does not work.
Service not activated or wrong operator
or wrong setting.
Check your Subscription with networ
No display.
Empty battery
Recharge battery.
This telephone is not equipped with a grounding function, and therefore some
functions may be limited when used in PBX systems.
If the fault persists...
Disconnect all other instruments
connected to the same line as the phone s
and try to make a call.
Disconnect the base unit
from the telephone line and plug a different phone in
master telephone socket.
Try making a call. If this works, the line is OK.
If the call does not work,and you are using a two-way socket adapter, remove
plug a telephone directly into the socket. If the call now works, the adapter m
faulty.
