Binatone Vesta 1305 Call Blocker, Руководство пользователя

Страница: 14 / 30

12
4.9.2 Store a Redial Number into the Phonebook
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press <MENU/OK> to show
ADD TO PB .
3. Press <MENU/OK> and then enter the name you want to use in the phonebook.
4. Press <MENU/OK> and then modify the number, if necessary.
5. Press <MENU/OK> to show
MELODY 1 .
6. Press <UP>/<DOWN> to browse the ringtone list. The respective ringtones play
while browsing the list. ( Note: the selected melody will only play when you receive
a call if you subscribe to Caller Display and the incoming number matches the
stored number.)
7. Press <MENU/OK> to con ¿ rm, and the entry will be stored.
4.9.3 Delete a Redial Number
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press <MENU/OK> then <UP>/<DOWN> to show
DELETE .
3. Press <MENU/OK> to con ¿ rm, and the entry will be deleted.
4.9.4 Delete all Redial List entries
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press <MENU/OK> then <UP>/<DOWN> to show
DELETE ALL .
3. Press <MENU/OK> to display CONFIRM? .
4. Press <MENU/OK> to con ¿ rm. All entries will be deleted and the display will show
EMPTY .
4.10 Find the Handset
You can locate the handset by pressing the <FIND> key on the underside of the base
station. All the handsets registered to the base will produce the paging tone and show
PAGING on the display for 60 seconds. You can stop the paging by pressing <TALK
ON>, <TALK OFF> or <C/MUTE> on any handset or <FIND> on the base again.
Note: If there is an incoming call during paging, the phone will ring with the incoming
call instead of paging.
4.11 Make an Internal Call (Multi - handset versions only)
This feature is only applicable when there are at least two registered handsets.
It allows you to make internal calls, transfer external calls from one handset to another
handset and make conference calls. If the called handset is not answered within 60
seconds, the called handset will stop ringing and the calling handset will return to
standby mode.
Note: If only one handset is registered to the base station, when <C/MUTE> is
pressed, it will display NOT POSSIBLE .