12
Binatone Help Line - 0845 345 9677
Calls are charged at Local Call rate.
1
Press the OK/MENU button.
Ö
The display shows
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
.
2
Press the UP or DOWN button until the display
shows
REMOTE ACCESS
REMOTE ACCESS
REMOTE ACCESS
REMOTE ACCESS
REMOTE ACCESS
.
3
Press the OK/MENU button to confirm.
Ö
4
Press the UP or DOWN button to set the first digit
REMOTE
ACCESS
5
Press the OK/MENU button to confirm.
Ö
6
Press the UP or DOWN button to set the second
digit of the REMOTE ACCESS code.
7
Press the OK/MENU button to confirm.
Ö
Setting up continue...
The third digit of the code will be blinking.
The second digit of the code will be blinking.
of the REMOTE ACCESS code.
The current three-digit code is shown, with the
The REMOTE ACCESS requires a three-digit code
8
Press the UP or DOWN button to set the third
digit of the REMOTE ACCESS code.
9
Press the OK/MENU button to confirm the new
10
Press the / button to return to standby mode.
that you need to enter if you call when away from
home to check your messages. The default is 321.
You can change it to any three digits you want.
REMOTE ACCESS code setting.
first digit blinking.
TAM HD:
ON/OFF setting
quality will be lower, but it will save up to about 40
about 20 minutes of messages.
Two different compression rates (ON and OFF) are
provided for you to select the recording quality/
total recording time of incoming messages.
quality will be higher, but it will only save up to
minutes of messages.
With the compression rate set to ON the recording.
With the compression rate set to OFF the recording
