Binary B-500-MTRX-230-16x16, Руководство по установке

Страница: 19 / 32

19
7.7. How to Set Embedded EDID for a Single Input
Example: Input =1 Embedded EDID=4 Display Readout (Example)
1. Press DEFAULT
 
2. Press Number Key ( 1-8 ) to select one Embedded EDID
04 
.

.
3. Press INPUT
04 
.

.
4. Press Number Key ( 1-8 ) to select the Input to which the EDID is applied
04 
.
0
.
5. Press
ENTER
 
(success)
FF FF
(fail)
7.8. How to Set Embedded EDID for All Inputs
Example: Input =1 Embedded EDID=4 Display Readout (Example)
1. Press DEFAULT
 
2. Press ALL to select all Inputs
 
3. Press Number Key ( 1-8 ) to select Embedded EDID
04 
.

.
4. Press
ENTER
 
(success)
FF FF
(fail)
7.9. EDID Learning
For more advanced EDID configuration, learning can be used to assign EDIDs directly from displays to one or more
inputs. This is useful when the system contains a display that cannot accept the highest resolution available from
sources, but all sources need to be available to all displays.
Note:
EDIDs can be learned from displays connected via the HDBaseT or the HDMI output.
When to Use Learned EDIDs
• An older display does not work properly with any of the embedded EDIDs.
• When the source is a PC it may be necessary to use a learned EDID.
7.10. How to Learn EDID to a Single Input
Example: Input =1 EDID Learned from Output 4 Display Readout (Example)
1. Press LEARN once for HDMI port or twice for HDBaseT port
L
.
_
.

2. Press
OUTPUT
L
.
_
.

3. Press
Number key (1-8)
to select the Output the EDID is learned from.
Use 10+ to select Outputs through 10-16
04 
.

.
4. Press INPUT
04 
.

.
5. Press Number Key (1-8) to select the Input to which the EDID is applied.
Use 10+ to select Outputs through 10-16
0
.
4
.
0
.

.
6. Press ENTER
 
(success)
FF FF
(fail)