BIMG Metvisa FTG.150B, Инструкция по эксплуатации

Страница: 14 / 44

14
advisable to install a point to drain this water, avoiding that the floor is wet and slippery and can
cause accidents.
3.3 Electrical Connection
The equipment comes with a power cord to be plugged into an electrical outlet. If the power
cord is damaged, it must be replaced with a new one. The exchange must be made by the
manufacturer, authorized agent or a qualified person in order to avoid risk.
The power cord plug has 3 round pins, and there is a corresponding marking of each one
(Phase, Ground and Neutral) just below each pin. It is mandatory to make a good ground connection
according to the current regulations.
CAUTION!
In order to avoid accidents, it is mandatory to connect the ground wire to all types of voltage.
Never connect the ground wire to the neutral wire of the mains, water pipes, gas pipes, etc.
For correct grounding, consider the instructions of the NBR 5410 - ABNT standard for Brazil
or according to the regulation in force in your country.
Accompanying the equipment, an equipotential grounding terminal (Electric Terminal), located
on the right-hand side of the oven.