BIMG METVISA AMG.130, Инструкция по эксплуатации

Страница: 10 / 28

10
Check the items and mounting location in the following image:
ATTENTION!
This equipment uses LPG (liquefied petroleum gas) for heating, and cannot be installed in
closed environments where there is no air renewal, as this gas is highly toxic.
Keep the gas cylinder at least 1.5 m away from sockets, switches, electrical switches, or any
device subject to sparks or flames, where these in contact with LPG gas could cause an
explosion, causing serious accidents with risk of death to the operator.
Do not install the equipment near flammable materials or products.
ATTENTION!
The installation and the place where the equipment will be placed must comply with the
rules of risk prevention and safety at work (Regulatory Norm NR-12 for Brazil or according
to the regulatory standard in force in your country).
The manufacturer is not responsible for possible direct or indirect damages caused by non-
compliance with said standards and other instructions presented in this manual.
3.2 Electrical Connection
The equipment is supplied with a power cord to be connected to an electrical network. If the
power cord is damaged, it must be replaced with a new cord. The exchange must be carried out by
the manufacturer, authorized agent or qualified person in order to avoid risks.