BIMG METVISA AGGE.2, Инструкция по эксплуатации

Страница: 21 / 28

21
Gas Leak.
Burst, loose or broken record.
Send the equipment to the nearest authorized
service station or contact the factory, as there is a
risk of accidents.
Register injector out of position.
Send the equipment to the nearest authorized
service station or contact the factory. There is a risk
of accidents.
Defective gas cylinder.
Check for gas leaks using soap suds only. If there is
a leak, inform the technician to repeat the
installation. If the leak persists, take the cylinder to a
well-ventilated place and notify the company that
sells or distributes the cylinder.
Gas cylinder installed in
horizontal position.
Install the cylinder in a vertical position. Never turn,
lay down or tilt the cylinder, as the gas may flow in
the liquid phase, canceling the function of the
pressure regulator, which could cause serious
accidents.
Equipment that smells of
burning or smoke.
Equipment voltage different from
mains voltage.
Send the equipment to the nearest authorized
service station or contact the factory.
Several electrical problems.
Burnt food Too high temperature and/or baking time.
It takes time to warm up.
Dirty roaster.
Clean the rotisserie, according to the guidelines in
item 5.1 (Cleaning Procedures).
Gas shortage or failure.
Check if there is gas in the cylinder, if the gas
cylinder valve is open, if the gas hose is
connected and if the gas regulator is open.
Roaster giving shock
Lack of grounding.
Follow the instructions in item 3.3 (Electrical
Connection).
Several electrical problems.
Send the equipment to the nearest authorized
service station or contact the factory.
For more information and clarification, contact the Authorized Technical Assistance nearest
you. See list of technical assistance on our website: www.metvisa.com.br
7. Useful Life of the Equipment and its Components
The equipment's useful life can vary from 3 to 5 years depending on the proper use, cleaning,
maintenance and quality of its components.
Below is the useful life ratio of the main components:
• On/Off Switch: 10.000 uses;
• Main Switch: 10.000 uses
8. Applicable Standards
The Brazilian standards applied for the development of the equipment and preparation of this
manual are:
•
IEC 60335-1;
•
IEC 60335-2-64;
•
Portaria 371 de 29 de Dezembro de 2009 do INMETRO;
•
NR-12 - Portaria 197 de Dezembro de 2010;
•
Applicable Technical Standards (ABNT NBR, ISO IEC).