10
L2
30.0
30.1
H2
35.0
34.9
Measurement
Mode
Note: If output 2 is disabled in the basic settings menu, pressure variables for that output will not
appear in the output setting menu. Additionally, outputs configured for point set mode in basic
settings will only show P1 and P2 variables.
Setting the Zero Point
The zero point of DPS series switches can be reset to counteract effects of changing
atmospheric pressure. This feature is not intended as an offset and the zero point should only
be reset when system pressure is relieved. To reset the zero point, press a
nd hold the “UP” and
“DOWN” arrow keys simultaneously until the display reads zero pressure.
L-2
h-2
0.0
0.1
0.0
Press and Hold
