24/40
INSTALLATION
Installation must be performed by qualified personnel.
After removing the packing materials, check the integrity of the appliance; if you are unsure,
do not use it and ask for qualified professional help. The packing materials (plastic bags,
polystyrene foam, nails, etc.) must be kept out the reach of children because they are
potential sources of danger, but must be disposed of in accordance with regulations in the
appropriate containers for recycling.
All packaging elements must be disposed of according to their raw material (see the symbol
stamped on each one) and according to the provisions of their municipality. The bag which
is unmarked due to its small size, therefore you have to follow the procedures for the
disposal of their municipality.
Before connecting the appliance, check:
a) that the voltage values shown on the data plate correspond to those of the electricity
supply network
b) the electrical system to which the appliance will be connected must:
- Conform to current standards
- Have cables with an adequate diameter for the power consumption
- Have effective grounding and be in accordance with the applicable electrical safety
standards: in case of doubt, request an accurate check from professionally qualified
personnel.
c) For installation, it is necessary to provide an omnipolar switch with a contact opening
distance equal to or greater than 3mm.
d) Ensure that the ceiling/structure to which the fan will be fixed can support a weight of
20kg, is free of bumps and is made of fireproof material. In addition, make sure that the fan's
mounting bracket can be fixed horizontally, in perfect adherence to the surface, and that the
power supply wires access the fan through its central hole. Also, make sure that the
environment in which it is installed is not dusty, that there are no volatile or flammable
materials, and that there is at least 1m clearance to the side of the fan.
Disconnect the service power line by setting the relevant circuit breaker to "0"/(off). Make
sure the service cannot be accidentally reactivated, by locking the control panel, or securely
attach a warning device, such as a label, to the service panel.
Switch off the master switch:
- Before connecting the appliance to the mains, during assembly,
disassembly and before cleaning the appliance
- When a malfunction is detected
- if the appliance will be out of use for short or long periods
- before replacing the lamp (if this accessory is present)
