4
5
6
1
2
3
Now that the large fence panel (
21524
) is fixed in place you can now fix the medium fence
panel (
21523
) in place on the front of the base. The medium fence panel should sit flush
with the end of the large fence panel. Once it is in position drill the pilot holes and fix in
place With
S50
screws.
4
21524
21523
S50
S50
S50
S50
21523
21524
level
at front
Front
Front
32
Picket Fence On Base
S50
S50
S50
S50
S50
Side
21524
31
Fit tightly against the
front of the building
Picket Fence On Base
30
N30
N30
N30
N30
N30
N30
N30
Ensure there
is a 24mm gap
WARNING!
This dimension is required
as part of safety to avoid
entrapment of feet.
Now that your building has been assembled you are ready to add the decking to the base.
The first length of decking (
SQ-01
) is positioned tightly up against the building front floor
joist. It is then fixed in place with two
N30
nails where the decking crosses the base joists.
29
N30
N30
N30
N30
N30 N30
N30
Fit tightly
against the
front floor joist
24mm 24mm
S50
S50
S50
S50
S50
Side
33
Fit tightly against the front of the building
Picket Fence No Base
Option B
Medium Picket Fence 856
(21523 - QTY x 4)
Option D
Large Picket Fence 1172
(21524 - QTY x 2)
21524
or
21523
34
21523
21524
level
at side
Front
21523
21524
or
21523
S50
S50
S50
S50
Front
Picket Fence No Base
Place the second length of decking next to the first, ensuring there is a distance of
24mm
between them. It is extremely important that this gap is the exact distance for safety
reasons.
Fix each length of decking with two
N30
nails where it crosses the base joist.
If you have purchased a Picket Fence to go with your base, place the largest fence panel
(
21524
) and position tightly against the front of the builing. The fence needs to be sitting
on the edge of the base. Once it is in place, pilot drill the holes and fix to the building and
base with
S50
screws.
Now that the side fence panel (
21524 or 21523
) is fixed in place you can now fix the front
fence panel (
21523
) in place at the front. The front fence panel should sit flush with
the side fence panel (see diagram). This is done to allow the door to open fully.
Once it is in position drill the pilot holes and fix in place with
S50
screws.
If you do not have a base with your building, the picket fence will sit on the ground.
Take the side fence panel (
21524 or 21523
) and position tightly against the front of the
builing. Drill the pilot holes and fix in place with two
S50
screws.
S50
21524
Side
Base
Fence sits
on base
For Queries and Help please access our Support Centre: www.gardenbuildingsdirect.co.uk/help
