Billion BiPAC 7800GZ Скачать руководство пользователя

Страница: 52 / 183

WAN – Main Port (ADSL)

A WAN (Wide Area Network) is an outside connection to another network or the Internet.

PPPoE Connection (ADSL)

PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using
PPP.

VPI/VCI:

Enter the information provided by your ISP.

Username:

Enter the username provided by your ISP. You can input up to 256 alphanumeric

characters (case sensitive).

Password:

Enter the password provided by your ISP. You can input up to 32 alphanumeric

characters (case sensitive).

Service Name:

This item is for identification purposes. If it is required, your ISP will provide you

the necessary information. Maximum input is 32 alphanumeric characters.

Encap. method:

Select the encapsulation format. Select the one provided by your ISP.

Auth. Protocol:

Default is Auto. Please consult your ISP on whether to use Chap, Pap or

MSCHAP.

IP Address:

Enter your WAN IP address. Leave the IP address empty or enter 0.0.0.0 to enable

the device to automatically obtain an IP address from your ISP.

Obtain DNS Automatically:

A Domain Name System (DNS) contains a mapping table for

domain name and IP addresses. DNS helps to find the IP address for the specific domain name.
Check the checkbox to enable this function.

Primary DNS/Secondary DNS:

Enter the primary and secondary DNS.

MTU:

Maximum Transmission Unit. The size of the largest datagram (excluding media-specific

headers) that IP will attempt to send through the interface.

Click Apply to confirm the settings.

Содержание BiPAC 7800GZ
























































































































































































Результаты поиска

Содержание BiPAC 7800GZ

Отзывы:

Похожие инструкции для BiPAC 7800GZ

Бренды по названию

Популярные бренды

Billion BiPAC 7800GZ, Руководство пользователя

Результаты поиска

Содержание BiPAC 7800GZ

Отзывы:

Похожие инструкции для BiPAC 7800GZ

Бренды по названию

Популярные бренды