40
EWAN Connect Mode
PPPoE Connection
Username:
Enter the username provided by your ISP. You can input up to 256 alphanumeric
characters (case sensitive). This is in the format of “username@ispname” instead of simply
“username”.
Password:
Enter the password provided by your ISP. You can input up to 32 alphanumeric
characters (case sensitive).
Service Name:
This item is for identification purposes. If it is required, your ISP will provide you
the necessary information. Maximum input is 32 alphanumeric characters.
Authentication method:
Default is Auto. Please consult your ISP on whether to use Chap, Pap or
MSCHAP.
IP Address:
Your WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to
automatically obtain an IP address from your ISP.
Obtain DNS Automatically:
A Domain Name System (DNS) contains a mapping table for
domain name and IP addresses. DNS helps to find the IP address for the specific domain name.
Check the checkbox to enable this function.
Primary DNS/Secondary DNS:
Enter the primary and secondary DNS.
MTU:
M T U ( Maximum Transmission Unit.) i s the size of the largest datagram (excluding
media-specific headers) that IP will attempt to send through the interface.
Содержание BiPAC 7800GZ
