manualshive.com logo in svg

Billion BiPAC 7800GZ, Руководство пользователя, Страница: 102 / 183

Поделиться
Скачать
Billion BiPAC 7800GZ Скачать руководство пользователя страница 102

98

 

WAN Profile  
 

ADSL

 

 

PPPoE (ADSL)

 

 

PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using 
PPP. 

 

 

 

Description: 

A given name for the connection. 

 

VPI/VCI: 

Enter the information provided by your ISP. 

 

Encap. method: 

Select the encapsulation format. Select the one provided by your ISP. 

 

Username: 

Enter the username provided by your ISP. You can input up to 256 alphanumeric 

characters (case sensitive). 

 

Password: 

Enter the password provided by your ISP. You can input up to 32 alphanumeric 

characters (case sensitive). 

 

Service Name: 

This item is for identification purposes. If it is required, your ISP will provide you 

the necessary information. Maximum input is 32 alphanumeric characters. 

 

NAT: 

The NAT (Network Address Translation) feature allows multiple users to access the Internet 

through a single IP account by sharing a single IP address. If users on your LAN have their own 
public IP addresses to access the Internet, NAT function can be disabled. 

 

IP (0.0.0.0:Auto): 

Your WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to 

automatically obtain an IP address from your ISP. 

 

Auth. Protocol: 

Default is Auto. Please consult your ISP on whether to use Chap, Pap or 

MSCHAP. 

 

Obtain DNS: 

A Domain Name System (DNS) contains a mapping table for domain name and IP 

addresses.  DNS helps to find the IP address of a specific domain name. Check the checkbox to 
obtain DNS automatically. 

Содержание BiPAC 7800GZ
























































































































































































Отзывы:

Нет отзывов