background image

                         Billion BiPAC 7300(G) RA (802.11g) ADSL2+ Firewall Router 

-

1-

 

 

 

 

 

Package Contents 

 BiPAC 

7300(G) 

RA (802.11g) ADSL2+ Firewall Router   

    CD-ROM containing the on-line manual   

 RJ-11 

ADSL/telephone 

cable 

 

  Ethernet (RJ-45) cable   

    AC-DC power adapter (12VDC, 1A) 

  This Quick Start Guide 

 

Splitter/ Micro-filter (Optional) 

 

One 2dBi detachable antenna (7300G RA

 

 

 

 

 

 

 

 

 
   

Attention 

 

PLEASE READ THE QUICK START GUIDE AND FOLLOW THE 
STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU 
INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE. 
IF YOU NEED MORE INFORMATION ON THIS SOFTWARE 
CONFIGURATION, PLEASE REFER TO THE USER’S MANUAL ON   
THE CD-ROM.

 

 

Do not use the router in high humidity or high temperatures. 

 

Do not use the same power source for the router as other 
equipment. 

 

Do not open or repair the case yourself. If the router is too hot, 
turn off the power immediately and have it repaired at a qualified 
service center.

 

 

Avoid using this product and all accessories outdoors.

 

 

Place the router on a stable surface. 

 

Only use the power adapter that comes with the package. Using a 
different voltage rating power adaptor may damage the router.

 

Warning 

Содержание BiPAC 7300G RA










Отзывы: