background image

                         Billion BiPAC 7300(G) RA (802.11g) ADSL2+ Firewall Router 

-

7-

 

 

Easy Sign On 

 
User just installs all of cables and uses the browser to surf Internet. At this time, the EZSO WEB 
GUI will be popped up and request you to input some basic information you get from ISP. After 
this, you can surf Internet right away. 
 
 
 

Troubleshooting 

 

1.  None of the LEDs are on when you turn on the router. 

Check the connection between the adapter and the router. If the error persists, you may have 
a hardware problem. In this case you should contact technical support. 

2.  You have forgotten your router login and/or password. 

Try the default login and password, please refer to Chapter 3. If this fails, you can restore 
your router to its factory settings by holding the Reset button on the back of your router for 6 
seconds or more. 

3.  Can’t ping any PCs on the LAN. 

Check the Ethernet LEDs on the front panel. The LED should be on for a port that has a PC 
connected. If it is off, check the cables between your router and the PC. Make sure you have 
uninstalled any software firewall for troubleshooting. Verify that the IP address and the subnet 
mask are consistent between the router and the workstations. 

4.  Frequent loss of ADSL linesync (disconnections). 

Ensure that all other devices connected to the same telephone line as your router (e.g. 
telephones, fax machines, analogue modems) have a line filter connected between them and 
the wall socket (unless you are using a Central Splitter or Central Filter installed by a qualified 
and licensed electrician), and ensure that all line filters are correctly installed and the right 
way around. Missing line filters or line filters installed the wrong way around can cause 
problems with your ADSL connection, including causing frequent disconnections. If you have 
a back-to-base alarm system you should contact your security provider for a technician to 
make any necessary changes. 

 
 
 

Product Support and Contact Information   

Most problems can be solved by referring to the 

Troubleshooting 

section in the User’s Manual

.

 

If you cannot resolve the problem with the 

Troubleshooting 

chapter, please contact the dealer 

where you purchased this product. 

 
Contact Billion 
 
WORLDWIDE: 

http://www.billion.com

 

 
 
 
 
 
 

 
 
 
 
 
 

7300(G) 

RA

:V1.01EN 

Содержание BiPAC 7300G RA










Отзывы: