1 -
Press button to input and delete tare values (TARE- Button)
This key has same function as on scales’ keypad.
2 -
Press button to activate the PRINT- Function (PRINT- Button)
Through this scales display value (plus additional data) will be transmitted via UHF
radio to receiver units (see accessories), e.g. a single print out will be activated on the
integrated printer of TELEDATA receiver unit.
3 -
Press button for zero-setting (Zero- Button)
This key has same function as on scales’ keypad.
4 -
Press button to activate the ADD- Function (Add- Button)
Press this button if several different single weights within one charge should be
collected resp. added. Scales display value (plus additional data) will be transmitted
via radio to receiver units, e.g. a single weight registration within a total print out will
be activated on TELEDATAs integrated printer.
5 -
Non-active
, only possible in combination with dual-range scales.
6 -
Press button to activate Print Total- Function
Through this scales display value (plus additional data) will transmitted be via UHF
radio to receiver units (see accessories), e.g. a total print out (total of all single weight
values will be activated on the integrated printer of TELEDATA receiver unit (additon
of all single weight registrations transmitted by ADD- Function).
7 -
Press button to activate Test Routine (Test- Button)
This key has same function as on scales’ keypad.
1
3
5
7
9
13
12
2
4
6
8
10
11
14
Picture 6.1: IR-Transmitter
