LDN
1- 21
12. Trouble Shooting
Repair work on digital crane scale LDN is only allowed by qualified
technical personnel.
If the advice does not bring any success, please contact the after sales service.
12.1 Device Errors
Fault Cause
Corrective
Display is dark
No power
Please check if scale is
switched on.
Please check if battery is
charged.
Please control the fuse.
(Only approved version)
Display shows for a short time ’+’
sign after switching on.
Scale is out of initial zero-
setting range
Switch off scale, unload the
scale and switch on again.
(Only non-approved version)
Display flashes
Scale is overloaded
Reduce the load inside the
nominal weighing range (see
type plate on right side of the
scale)
Display shows only the ‘+’ sign
High overload
Reduce the weight to a
permissible value
It is not possible to switch off the
scale.
Electronic error
Remove fuse and insert it
again, switch on scale.
Scale is outside zero-setting
range
Please reduce the load inside
the zero-setting range.
Scale can not set to zero.
Scale is set into tare
weighing mode, Net- LED is
illuminated.
Press TARE- Button again to
quit tare weighing mode.
