6 -
Symbol for Decimal Point
Is displayed to indicate position of decimal point.
7 -
Symbol for Battery Control
Scales’ accumulator is to charge below a battery voltage of 5.4 volts,
displayed by a flashing
symbol (empty accumulator). Now you
can still work with your instrument for the next 30 minutes (e.g. if it is
not possible to pause your weighing process). By then the battery
needs to be charged. At a battery voltage of 5.3 volts the scale is
switched off automatically to avoid a total discharge and consequently
accumulator damage.
8 -
Symbol for the range
Shows range 1 or 2 at Multirange systems.
9 -
Receiver (diode) of IR- Transmitter
5. Auto
Power-Off
This instrument is equipped with an automatic power-off setting device, which is set default =
deactivated. In scales setup mode you can choose a power-off setting time between 1…99
minutes. To activate this device or changing of setting time, please contact after sales service.
6. Infrared-
Transmitter
By means of IR-transmitter you can activate further additional functions beside scale keypad
functions.
Change transmitters’ batteries (4pcs. a 1.5V Type AAA, Micro, LR03, AM4, MN2400) when
operating distance is getting insufficient (less than approx. 20m).