Bil-Jax ESP 19 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 96

background image

36

Upper Control Mode

•

No Power To The Joystick: No Communication

-There is power on the main controller, but not on the joystick.

1. When in Upper Control Mode, LED “UP CTRL SEL” should be

ON. If it’s OFF, check the Upper/Lower selector switch and
make sure it’s set to Upper Control.

2. Make sure the joystick is connected to EASI POS and EASI NEG

terminals of the main controller.

3. Make sure E-STOP switch on the joystick is OFF.

4. Make sure LED’s EASI-TXD and RXD on the main controller

are

blinking at high frequency. If not, Check Fuse F1 located on the
main controller. If all of the above are O.K, the joystick may be
faulty.

•

Joystick Does Not Drive The Motor

-Moving the joystick forward or reverse does not drive the machine.

1. Check if there is communication between the main controller and

the joystick. If L1 and L2 LED’s on the joystick are not blinking
rapidly, there is no communication. Refer to the previous step to
troubleshoot "No Communication".

2. L1 and L2 on the joystick are blinking rapidly, but unit still does

not drive, then:

a. Press "ENABLE" on the joystick, move the joystick

forward, Check if LED "HRMTR ON" turns on. If not on,
the main controller may be faulty. Check fuse F2 on the
main controller.

b. If the LED turns on, but unit still doesn't drive, the motor

controller may be faulty. Refer to the Motor Controller
Troubleshooting section.

•

UP/DOWN, LEFT/RIGHT Commands Do Not Work

-When pressing UP, DOWN, LEFT, or RIGHT switches on the joystick,
the machine does not respond.

1. Check if there is communication between the main controller and

the joystick. If L1 and L2 LED’s on the joystick are not blinking
rapidly, there is no communication. Refer to the previous step to
troubleshoot "No Communication".

2. For faulty UP command:

a. Hold "UP" switch on the joystick, make sure it lights up.

If it doesn't, the internal bulb may be blown or the switch
may be faulty.

b. Press "UP" and "ENABLE" on the joystick. Make sure

that LED's "PUMP ON", "UP ON" and "HRMTR ON" turn
ON. If not, the main controller may be faulty.

3. For faulty DOWN command:

a. Hold "DOWN" switch on the joystick, make sure it lights

up. If it doesn't, the internal bulb may be blown or the
switch may be faulty.

«
...
34
35
36
37
38
...
»

Содержание ESP 19

































































































Отзывы:

Нет отзывов

Похожие инструкции для ESP 19

Бренд: GEA Страницы: 66

Бренд: OBSIDIAN CONTROL SYSTEMS Страницы: 13

Бренд: Hamma Страницы: 60

Бренд: R. Beck Maschinenbau Страницы: 34

Бренд: ESAB Страницы: 34

Бренд: iWeld Страницы: 36

Бренд: Multi-Clean Страницы: 4

Бренд: Vestil Страницы: 11

Бренд: Lampert Страницы: 24

Бренд: R-Tech Страницы: 20

Бренд: 2VV Страницы: 29

Бренд: Miller Electric Страницы: 40

Бренд: Fancom Страницы: 51

Бренд: LIFTINGITALIA Страницы: 24

Бренд: ATH Страницы: 76

Бренд: Haklift Страницы: 32

JFLEX-Visualisation1

Бренд: Kontron Страницы: 19

Бренд: Hanshen Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды