page 5
7.
Put the dismounted plug of the
speed sensor into the free socket of
the bikespeed cable set.
Also in this case the plug only fits in
the correct direction.
Also put the plug so far into the socket that the seal is no longer visible.
8.
Fasten the socket of the bikespeed-
cable set to the intended spot of
your bicycle. Use e.g. cable strap to
fasten the socket and the cable.
Carry the cable to the area of the
gravel deflector.
The cable of the bikespeed-key cable
set can be shortened to the length
required.
9.
Skin the brown and grey conductor
of the bikespeed- cable set (USB-
slot) by about 5mm.
We recommend not to tin-coat the
ends!
10.
Connect the skinned conductors to
the screw terminals. Use a slotted
screwdriver with a 2.5mm blade to
screw the cables in, or use the bit
included.
