page 3
Installing the bikespeed-key cable set:
Tools required: Allen Key (size 8), Crank puller (Lifu), Torx (T20), slotted
screwdriver with a blade of 2.5mm or Bit holder
1.
Remove the attachment screw of
the treadle on the opposite side of
the chain guide. (Left) For most
bicycles with a Bosch-engine you
will need an Allen Key size 8 to do
this.
2.
Dismount the treadle with a
suitable crank puller (e.g. picture:
Lifu, used for most bicycles with a
Bosch-engine)
Screw the crank puller into the
thread of the attachment screw
and dismount the treadle with a
suitable Allen key.
3.
Remove the three screws of the
gravel deflector. (tool: Torx T20)
