7
4.
Recharge: During recharging, LED stays red. When fully recharged, LED turns green.
5.
Battery capacity notification: when BK-D is on, press [B] for 3 seconds and the LED
flashes green to indicate the battery capacity (as the table below). If BK-D is
connected to the headset, the headset can hear the announcement of BK-D software
version and the battery capacity.
Number of times flashes green
Battery Capacity
5 times
100%
4 times
Over 80%
3 times
Over 50%
2 times
Near 25%
1 times
Near 10%
6.
Recharge note:
BK-D supports standard 5V USB for recharging. You may use PC, cell phoner
recharger or mobile recharger to recharge BK-D.
BK-D is shipped with a small amount of power. WE suggest you to fully recharge
BK-D before your first use.
6
Pairing and Usage of Headset and BK-D
Please upgrade the software to V2.00 version if you use BK-S1 or ALOHA.
6.1
ALOHA Pairing with BK-D
1.
Turn on ALOHA, and press [M] until LED flashes red/blue alternatingly.
2.
BK-D is on, press [A] until LED flashes blue rapidly. At this point, BK-D and
ALOHA start to pair and establish connection.
3.
When successfully connected to BK-D, LED flashes blue three times + green once.
Note: When you connect your headset with both BK-D and cell phone, be sure to pair with
BK-D first and then with cell phone. In this order, the “re-dial last number” and
Содержание BK-D
Страница 1: ...1 Owner s Manual Bluetooth Dongle BK D ...