c. Pairing between ALOHA#3 and ALOHA#4
(refer to: a. Pairing between ALOHA#1 and ALOHA#2)4
d. Pairing between ALOHA#4 and ALOHA#5
(refer to: a. Pairing between ALOHA#1 and ALOHA#2)
Note: When turning off the headsets paired for group intercom, the pairing
information will be lost. If any member of the group turns off their headset,
all the headsets must be assigned a new number and paired again for
group intercom (following the procedure in 9.1) for group intercom.
9.2.3
Group Intercom Usage
After completing pairing for group intercom, press [C] on any member
headset will automatically start group intercom among the five headsets.
The headset joining the group intercom, only ALOHA#1 and ALOHA#5 can
continue to connect to cell phone and GPS, the others in the middle
(ALOHA#2, ALOHA#3 and ALOHA#4) will be disconnected from cell phone
and GPS.
In group intercom, if ALOHA#1 or ALOHA#5 is connected to cell phone and
GPS, ALOHA#1 or ALOHA#5 will leave the group intercom temporarily to
receive phone call or GPS instruction when cell phone calls or GPS
instruction comes in. ALOHA#1 or ALOHA#5 will rejoin the group intercom
automatically after ending the GPS or phone call.
Example:
ALOHA#1: Press [C] once and hear “Group initiated”
ALOHA#1 starts to connect to ALOHA#2.
Upon successful connection:
ALOHA#1: hear “Member 2 Joined”
ALOHA#2: hear “Member 1 Joined”
At this point, ALOHA#1 and ALOHA#2 can intercom with each other
Following the order of assigned number:
ALOHA#2 starts to connect to ALOHA#3, and after successful
connection,
ALOHA#3 starts to connect to ALOHA#4, and after successful
