Detailed Procedure:
9.2.1
Assign number (1,2,3,4,5)
a. Enter Group Member Setting Mode
：
In ON state, press both [A] and [C] until LED stays green.
b. Assign a number to headset:
According to the number assigned, press [C] rapidly.
For example:
To assign 1 to ALOHA headset (called ALOHA#1), press [C] once. At
this point, LED flashes green once every 2 seconds and voice
notification “Group Member 1”.
To assign 2 to ALOHA headset (called ALOHA#2), press [C] once. At
this point, LED flashes green twice every 2 seconds and voice
notification “Group Member 2”.
．
．
To assign 5 to ALOHA headset (called ALOHA#5), press [C] once. At
this point, LED flashes green five times every 2 seconds and voice
notification “Group Member 5”.
Note: the headset only allows to assign up to Group Member 5.
c. Exit Group Member Setting Mode
：
After assigning a number of each ALOHA headset, press [F] on each
headset. The LED flashes blue to indicate exiting the setting mode.
