Bike Sport Developments Ltd
Tel 0044 (0)1327 263942
–
www.bikesportdevelopments.co.uk
Manual revision 09, 07/11/2015
1
Bike Sport Developments Ltd
Unit 3D Manor Business park, Grants Hill way, Woodford Halse, Northants, NN11 3UB - UK
Tel: 0044 (0)1327 263942
Copyright
– Bike Sport Developments Ltd - 2015
Yamaha R1
– 2015 onwards
Clutch-Free
shifting……Perfected
Fitted in under an hour
No ECU re-flash
Can be used in all power modes and adjusts the BLIP response automatically.
All existing bike systems, and sensors are retained
Integrates with the bike CAN bus.
No error codes on the dash when plugged in.
A single high quality load cell replaces the existing up-shift switch for use with shift and blip
functions with fully programmable load set points.
Supplied with a BLIP-Map for your bike but also fully re-programmable to suit different rider,
tracks, gear ratios, and foot rest hardware
System may be re-programmed or adjusted by the additional USB interface and the
WinBLIP
software. Sold as a separate part.
Machined aluminium housing with fully seal
ed electronics and high specification ‘plug n play’
wiring, no wiring modifications needed.
Designed and made in the UK by Bike Sport Developments Ltd
How it works
– The Yamaha R1uses a Ride By Wire system with sensors to read the twist grip % telling
the ECU what the rider wants, and electric motors on the throttles carry this out. Between these 2 devices
sits the ECU with maps and control strategies to make the bike safe and easier to ride in a wide range of
conditions.
Blip-Box reads signals from the twist grip sensors and data from the CAN bus and at the appropriate foot
pressure from the rider it creates a BLIP on the throttle which releases the pressure on the gearbox
allowing a perfect smooth back shift. Like a quick shifter, but in reverse.
Download the software, drivers and PDF manuals at
www.bikesportdevelopments.co.uk/blipbox
